Our Products

Model TLS16

  • This is a very powerful compact water cooler that will supply 16 litres of cold water per hour.
  • It has a 3 litre water storage tank, designed so that the tank can be backwashed to remove any sediment build up that may have entered the storage tank.
  • Designed with rounded edges to prevent restriction of air flow in condenser if in a confined space.
  • The nuts, bolts and screws are stainless steel with stainless steel side panelling.
  • Can be connected to mains water supply or a low pressure filtration system.
  • The water connection is 1/4″ BSP inlet and outlet, recessed below top and bottom of water cooler to protect water fittings.
  • A two year warranty on the refrigeration system
  • Designed, Engineered and Manufactured in Australia

 

  • This is a commercial water chiller.  If this chiller is installed in an enclosed cupboard.  An exhaust fan with a minimum diameter of 125mm or a fully vented louvered door must be installed.  There must be adequate ventilation to prevent the water chiller from overheating.  Overheating will damage the water chiller and surrounding cupboard space.

Proudly Australian Made

 

All specification, dimensions, parameters and performances subject to change without notice

Model

TLS16

Water Supply

Mains Water Connection

Dimensions

290W x 485D x 320H

Weight

21kgs

Cooling System

Refrigerant R134a

Power Supply

220 / 240 volt, 50Hz, 1PH, 400 watts, 1.92 amps, IP21

Colour

All specifications, dimensions, parameters and performances subject to change without notice.

Enquire Now