Name: Stainless Steel School Drinking Trough
- Frigmac has a wide range heavy duty wall mounted stainless steel drinking troughs available in
- Model DT15 3 faucet 1500mm wide x 400mm deep x 220mm high
- Model DT20 4 faucet 2000mm wide x 400mm deep x 220mm high
- The water drain can be fitted to the left or right hand side of the drinking trough depending upon the installation
- All plumbing and tap ware is easily serviced from front of the drinking trough.
- Water from all drinking points flows away towards back of trough to prevent clothes from getting wet.
- Faucets are designed to fit low on the drinking trough to help prevent vandalism
- There is a variety of faucets available for this style of drinking trough.
- Chrome bubbler (Model 285)
- A flexi rubber dial a bubbler (Model 030774-006)
- The rubber mouth guard faucets (Model TD15P)
- New vandal proof bottle filler
- Drinking troughs are already plumbed for installation.
- Plumbing in copper pipe with brass fittings and all water lines are insulated.
These faucets can be seen under heading Faucet (Tap ware) A refrigerated water chiller can be installed underneath these drinking troughs. (see Model FRS (to suit a 4 tap trough) or Model FRCS (to suit a 3 tap trough)
All specifications, dimensions, parameters and performances subject to change without notice.